PLAYMAT is a realistic, fully operational, model-making system. It was developed for the youngest "Do-It-Yourselfers."  PLAYMAT is a real machine, but in spite of it, turning, sawing, drilling and sanding with PLAYMAT is mere "child's play".

Thousands of enthusiastic children have produced tiny artworks in their schools and during our workshops, thereby testing the suitability of this tool's diverse variations.  Due to the child-proof construction of all the machines, there is no danger of injury. Skillful youngsters can produce their first work pieces even during their pre-school years.

The PLAYMAT kit contains all the necessary parts for building up to four different, real working machines which are easily assembled:
 

Woodturning machine - for soft wood with a diameter of up to 30mm

Jigsaw - for plywood with a thickness of up to 6mm, Balsa up to 20mm

Drilling machine - for the screw drilling of wood

Sanding machine - for the sharpening of tools and finishing of work pieces

	Woodturning machine for soft wood with a diameter of up to 30mm   Point width 130 mm Peak height 36 mm Spindle revolution 3700 R/min Engine performance 15 Watt Rated speed 11000 R/min
	Jigsaw for plywood with a thickness of up to 6mm   Saw plate surface 90 x 90 mm Cut strength Plywood up to 6 mm Stroke rate 3700 R/min
	Drilling machine for the screw drilling of wood   Desk surface 90 x 90 mm Distance desk surface - spindle nose 0 to 36 mm Discharge 36 mm
	Sanding machine for the sharpening of tools and finishing of workpieces   Disk revolution 3700 R/min Sharpening surface Ø 32 mm

 

The PLAYMAT machines work in the same manner as the bigger machine tools (using a machine bed, slide, drilling table, etc...), so little carpenters can be trained, in a safe and playful way, in how the big machines really work.

For the system's drive, four 1.5 volt batteries are required, but not included.  Available options include: a special, child-proof adapter; turning wood; sawing wood; and plenty of detailed construction plans.

THE PLAYMAT DELUXE includes the PLAYMAT, a spare parts kit, 2 wood working books as well as assorted wood, plywood, sandpaper and a 12V transformer.

   Technical data PLAYMAT:

Sawing
Table surface 90x90mm
Cut in Plywood bis 6mm
Cuts per minute 3700

Sanding
3700 rpm
disk Ø 32mm

Drilling
Table surface 90x90mm
Distance Table to spindle nose 0-36mm
Loading 36mm

Woodturning
Distance between centers 130mm
Swing over bed 36mm
Spindle speed 3700 rpm
Motor capacity 15 Watt
Motor speed 11000 rpm